Eight Specifications And Maintenance Methods For Pipe Bending Machines 返回首页

The pipe bender is a new type of pipe bending tool with a curved pipe function and a topping function. It has many advantages such as reasonable structure, safe use, convenient operation, reasonable price, fast loading and unloading, easy to carry, and multi-purpose. Hydraulic Pipe Bending Machine has a large share in the domestic , mainly used in factories, warehouses, docks, buildings, Installation of pipelines and repairs for railways, automobiles, etc. In addition to the elbow function, it can also be used to remove the elbow parts as a separate hydraulic overhead machine.


Then, what kind of problems should be paid attention to when using the pipe bending machine that is purchased back? We can give you some suggestions as a Hydraulic Press Manufacturer.


1. Before operation, please check whether the lubrication points of the machine are lack of oil, whether the safety protection device is reliable, whether the movement mechanism is loose, etc.

2. Start the elbow oil pump and check whether the system pressure is within the specified range. If it is high, it will damage the hydraulic components and waste power. If it is too low, it will affect the work.

3. Adjust the position and required angle of the part and position the part to the required length.

4. Adjust the vertical lifting rail to make the guiding mold pressing cylinder advance to clamp the tight iron pipe.

5. The clamping mold clamping cylinder can clamp the iron pipe.

6. Normal operation Put the workpiece into the bending mold, and the front end is in contact with the positioning, and the foot switch can be stepped on.

7. After the work is finished, cut off the power supply and do the cleaning and lubrication work.

8. If the operation of the pipe bending machine is in an emergency, press the emergency stop button, then turn the twist switch to the manual position and use manual reset. If the fault occurs, please report it in time.


Let's talk about eight methods for tube maintenance:


One: When operating the pipe bender, it must be operated in strict accordance with the operating regulations (emphasis).

Two: The pipe bender must be kept clean, and the unpainted parts should be coated with anti-rust grease.

Three: Each time the pipe bending machine is turned on, according to the lubrication chart, the lubricating oil should be added regularly, fixed point and quantitatively. The oil should be clean and free of sediment.

Four: Regularly check the repair switch, insurance, handle, to ensure that its work is reliable.

Five: The lubricant in the motor bearing should be replaced regularly, and often check whether the motor part is working properly.

Six: Regularly check whether the V-belt, handle, knob, and button are damaged. If the wear is serious, replace it in time.

Seven: It is strictly forbidden for non-designated personnel to operate the equipment. It is usually necessary to stop the person from leaving the machine.

Eight: 10 minutes before work every day, add lubrication to the pipe bending machine and clean the pipe bending machine.


Beveling Machine


Beveling Machine


Experts said that in addition to the bend function, the bender can also remove the cylinder in the elbow component as a separate hydraulic top drive. Generally, oils with good anti-emulsification performance, good foam resistance and good lubricating properties are used.

The above is about the use of bending machine specifications and maintenance methods, I hope to be helpful to everyone, if you have the need for bending machine can contact us, our company specializes in the production of pipe bending machine, hydraulic pipe bending machine, Beveling Machine and other equipment, Excellent quality, best service, sincerely welcome your presence and patronage, all staff will be happy to provide you with a full range of services.

上一篇:How Does The Hydraulic Pipe Bending Machine Operate?

下一篇:Talking About Bending Machine Equipment

TEL:0086-139-31703233
Fax : 0086-317-6817833
Email:lmdzjxc@lmdzjxc.com
Address:Xiwang New District ,Mengcun Hui Autonomous County, Hebei province,China. sitemap google

Facebook Linkedin Pinterest 冀ICP备12017094号-2